VARD 400/6 EX

VARD 400/6 EX

In-line mixed flow fan 3-ph., explosion-proof II 2G Ex h IIB T3 Gb

Ref.-No. 06692

Features

High pressure in-line mixed-flow fan, cylindrical duct with flanges on both ends, direct driven, explosion-proof according to ATEX Cylindrical pre-galvanised sheet-steel casing with a rolled flange at both ends Dimensions and flange fixing holes to DIN 24155, page 2. With guide vanes for improved performance. Mixed flow impeller with 8 spatially curved blades from galvanised steel. Dynamically balanced to class G 6.3 VDI 20060 and DIN ISO 1940. Totally enclosed, maintenance free 3-phase squirrel cage motor, low noise sealed for life ball bearings, not controllable. Explosion proof execution according to ATEX.

Technical Data

General Information
Ref.-No.:06692
Type:VARD 400/6 EX
Flow rate free-blowing:3390 m³/h
RPM:925 min-1
Number of poles:6
Voltage:400 V , 3 ph , 50 Hz
Rated current (FLC) uncontrolled:0.8 A
Nominal power:250 W
Max. air flow temperature (uncontrolled):40 °C
Explosion proof:
IP protection category:54
Insulation class:B
PRODUCT_DETAILPAGE_wheel_diameter:400 mm
Weight:21,00 kg
Wiring diagram no.:470

Downloads – Catalogues, brochures, certificates & Co.

On this page you will find all our promotional PDF documents. These include catalogues and flyers, certificates and approvals.

Downloads

Software

Here you will find configuration tools, software updates and current firmware versions for Helios products with manual update function. For our planning, design and product selection software offerings, visit the Helios ToolBox.

Software

Installation instructions and data sheets

Here you will find installation instructions and data sheets for our fans and accessory components.

Installation instructions and data sheets

KWL Systemgarantie

Die exklusive 5-Jahres-Garantie für Wohnungslüftungsanlagen mit easyControls: zusätzliche Sicherheit über die gesetzlichen Gewährleistungsbestimmungen hinaus.

Mehr erfahren